파파파~ 파란맛~
시미즈
314 11 13
안궁금해 허니.....
제조사 공식앱에서 지 혼자 바이오스 업데이트 하더니 속썩이는군요....
그나저나 영디비에 이런 콘까지 생겼네요
아직 정식 이름도 없지만 아무튼 만들어주신 갓파인님 ㄷㄷ
대단하신..
시미즈
AlpineSnow님 포함 11명이 추천
Comment 13
Comment Write
1등 파랗게 파랗게 물들었군요
20:02
25.10.28.
엘릭스
앗 이 노래가 있었네요ㅋㅋㅋ
20:06
25.10.28.
2등 
20:05
25.10.28.
3등 흔치 않지만 종종 일어날때마다 놀라는 파란 화면...
20:24
25.10.28.
두려운 파랑이 ㄷㄷ
20:27
25.10.28.
어우…;
20:34
25.10.28.
구글님의 솔루션입니다.
The
winload.efi blue screen error 0xc000000f is typically caused by a corrupted or missing Boot Configuration Data (BCD) file, often due to a power failure, disk error, or malware. To fix it, use a Windows installation media to access the Startup Repair tool, which will automatically attempt to diagnose and fix the problem. If that doesn't work, use the same installation media to access the Command Prompt and manually rebuild the BCD using bootrec.exe commands.
1. Prepare and use Windows installation media
- Create a bootable USB drive with Windows installation media on another computer. You can use the official Microsoft Media Creation Tool for this, as suggested by Microsoft Learn.
- Insert the USB drive into the affected computer and restart it.
- Enter the BIOS/UEFI settings (usually by pressing F2, F12, Del, or Esc) and change the boot order to prioritize the USB drive.
Save the changes and exit the BIOS. The computer will boot from the USB drive.On the first screen, select your language and click "Next".Click "Repair your computer" in the bottom-left corner, not "Install now".
2. Attempt an automatic repair
- From the "Choose an option" screen, select "Troubleshoot".
- Go to "Advanced options".
- Click "Startup Repair". Let the tool run to try and automatically fix the issue.
3. Manually rebuild the BCD
- If Startup Repair fails, return to the "Advanced options" screen and select "Command Prompt".
- Type the following commands, pressing Enter after each one:
bootrec /fixmbrbootrec /fixbootbootrec /rebuildbcd
- If
rebuildbcdasks to add the installation to the boot list, typeYand press Enter. - Type
exitand press Enter to close the Command Prompt. - Restart your computer and remove the USB drive to see if the issue is resolved.
4. Check your hard drive for errors
- If the above steps don't work, the hard drive may be failing.
- In the Command Prompt (from the "Advanced options" menu), type the command chkdsk /f /r C: and press Enter to check the drive for errors.
- You may need to restart the computer for the scan to begin.
21:11
25.10.28.
잘 해결되길 바랍니다.
22:40
25.10.28.
바이오스 문제였으니 바이오스 전버젼으로 돌려보면 될지도요
22:44
25.10.28.
00:07
25.10.29.
홀리몰리 ㄷㄷㄷ 잘 해걸되길 바라요.
저는 저런 화면이 뜰 수 있는 컴터도 없는 ㅠ 힝구 ㅠ
이거 어디서 많이 본거 같은 것은 착각일 거예요
22:09
25.10.29.
You do not have permission to access. Login
Report
"님의 댓글"
Are you sure you want to report this comment?
